WOLFHOUND L SERIES

Wolfhound "L" series scopes are the upper end of commercial grade thermal scopes with higher magnification.

The Wolfhound "L" series comes in two versions.                                             

One as the 38 - L6 @ 6 X optical magnification and, 64 - L4 @ 4 X magnification.

Both these scopes offer higher optical magnification than other makes in the commercial class.

The Wolfhound series scopes are an economical option for the commercial shooter who does not need full spec professional equipment. 

All the WOLFHOUND series have silent uninterrupted NUC* (Non Uniformity Correction). 

From a users viewpoint, the higher magnification of the 38 - L6 may be preferable for longer range work.

Do not be misled by the suggestion sometimes made, that the "small FPA will produce a lower resolution compared to the larger FPA version". The actual "wanted" image in the overall view, contains the SAME number of pixels in either FPA. There may be a small degradation of image quality when the image is interpolated to the OLED, but the higher magnification far outweighs any small loss.

The Wolfhound series thermal scopes utilise the same rugged chassis as the TWS models.

The optional MAK mount is recommended for use with the "L" series Wolfhound.

For firearms over .243W a recoil reduction system is required with this lens size.

Suggested, RMS-50 recoil rail system.

Optional inbuilt video recording is now available for the Wolfhound series scopes.

Wolfhound  38-L6  $  8575 US + Au GST

# G140699Y5

Wolfhound  64-L4  $11155 US + Au GST

# G140909Y5

RMS-50.                 $    564 US + Au GST

MAK Mount.           $    390 US + Au GST

Built in recorder.    $    350 US + Au GST

Prices & specifications can change without notice.

NUC* This system provides continuous calibration with no break in the image, unlike most other thermals. 

This new range of thermal products built in CANADA, is already proving to be superior to any commercial grade thermal equipment currently available. 

Although TI-GEAR products are referred to as commercial, they are in a class many levels above the commonly available "commercial" thermal scopes.

These GSCI thermal scopes perform very close to the level of the specifically built military products and are therefore eminently suitable for serious professional use.   

The TI-GEAR scopes provide economically priced products without compromising the high standards that GSCI products are renowned for.

These high performance thermal scopes use a full aluminium body for reliable service in the field.

A feature of GSCI thermal products, is the NUC,  (Non-uniformity Correction). Automatic, silent, no clicks, no calibration break (at the "wrong" time), and have no shutter to fail at a critical point rendering the scope inoperable.

Calibration is smooth and continuous and does not distract the user during operation This allows the shooter to take the "shot" when the shooter is ready and not be controlled by the scope.

The rifle scopes have programmable feature, that after a shot is taken when using a "zoom" setting, the scope will immediately revert to the next lower magnification to provide a wider field of view for the preset time, before returning to the original setting.  

A range of optical magnifications in rifle scopes from 2 X - 4.5 X depending on the model as well as 1 X - 4.5 X for monoculars.

7 year warranty as per GSCI standard terms & conditions.

Supplied with hard and soft carry cases. (See bottom of page.)

NOTE. (1)   MAK mount supplied with 75 mm models as standard.

            (2)   MAK mount (Optional) plus $156 US from std mount. 

                    # M01013S0

            (3)   Inbuilt video recording (Optional) plus $250 US.

                    # R01116S0

MAK mount (Optional), & Internal Recording must be specified with original order.

Australian Shooting Services recommends the MAK mount be used on all models of TI-GEAR thermal scopes for greater mounting flexibility.

Although all GSCI thermal products are controlled items, they are legally available for use in Australia. 

Australian Shooting Services arranges all the required Canadian documents for the export / import of all GSCI thermal products from Canada at no cost to the purchaser.

Contact us for full specification list.

Pricing below is shown in $US and are GSCI list price. 

Due to the constant change in $AU / $US rates, current Australian prices & GST will be applied at the time of ordering. 

They do not include freight and insurance from CANADA.

#FI 13025S7

Prices indicated on this page are negotiable, please enquire.

Prices and specifications can change without notice.